Show Dhcp Ipv6 Server Statistics - Cisco ASR 9000 Series Command Reference Manual

show dhcp ipv6 server statistics

show dhcp ipv6 server statistics
To display the statistics for Dynamic Host Configuration Protocol (DHCP) server, use the show dhcp ipv6
server statistics command in EXEC mode.
show dhcp ipv6 server statistics{debug| location| vrf}
Syntax Description
debug
location
vrf
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ip-services
Examples This is a sample output from the show dhcp ipv6 server statistics command:
RP/0/RSP0/CPU0:router# show dhcp ipv6 server statistics
Tue Sep
|
-------------------------------------------------------------------------------------------
default
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
220
Displays the debug statistics for the proxy.
Displays the node location for the proxy.
Displays the proxy statistics by VRF.
4 19:13:47.472 UTC
VRF
Modification
This command was introduced.
Operation
read
| RX |
| 10003 |
BNG DHCP Commands
TX | DR
11651 | 3