Cisco ASR 9000 Series Command Reference Manual page 461

PPPoE Commands
Setting a value of 0 for delay means that no transmission delay is set for the PADO message. Setting a value
of 10000 means that an infinite delay is set for PADO message; or, in other words, the PADO message is
never sent.
Within the category of Remote-ID matches, full string matches are preferred to sub-string matches. If more
than one sub-string match occurs, the selection is based on a random order.
If there is neither a string match nor a sub-string match, the configured Circuit-ID delay is used (if a Circuit-ID
is present in PADI message), followed by the configured Remote-ID delay (if a Remote-ID is present in PADI
message).
If there are no matches, the configured pado delay is used for PADO message.
Task ID
Task ID
ppp
Examples
This example shows how to configure a delay of 1000 milliseconds for the PADO message:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# pppoe bba-group bba1
RP/0/RSP0/CPU0:router(config-bbagroup)# pado delay remote-id 1000
This example shows how to configure a delay of 8000 milliseconds for the PADO message, if the Remote-ID
received in the PADI message exactly matches the configured string (remote1 in this example):
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# pppoe bba-group bba1
RP/0/RSP0/CPU0:router(config-bbagroup)# pado delay remote-id string remote1 8000
This example shows how to configure a delay of 5000 milliseconds for the PADO message, if the remote-id
received in the PADI message contains the configured string (remote2 in this example):
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# pppoe bba-group bba1
RP/0/RSP0/CPU0:router(config-bbagroup)# pado delay remote-id contains remote2 5000
Related Commands
Command
pado delay, on page 442
pado delay circuit-id, on page 444
pado delay service-name, on page
448
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Operation
read, write
Description
Configures a specific delay for PPPoE PADO message for a PPPoE
BBA-Group in BNG.
Configures a delay for PPPoE PADO message for a PPPoE BBA-Group
in BNG, based on the Circuit-ID received in PADI message.
Configures a delay for PPPoE PADO message for a PPPoE BBA-Group
in BNG, based on the Service-Name received in PADI message.
pado delay remote-id
5.2.x
447