Show Dhcp Ipv6 Server Binding - Cisco ASR 9000 Series Command Reference Manual

BNG DHCP Commands

show dhcp ipv6 server binding

To display the client bindings for Dynamic Host Configuration Protocol (DHCP) server, use the show dhcp
ipv6 server binding command in EXEC mode.
show dhcp ipv6 server binding{detail| duid| interface| interface-id| location| mac-address| remote-id|
summary| vrf}
Syntax Description
detail
duid
interface
interface-id
location
mac-address
remote-id
summary
vrf
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ip-services
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Displays detailed bindings for proxy.
Displays client bindings for DUID.
Displays client bindings by Interface.
Displays client bindings by Interface ID.
Specifies the node location.
Displays detailed client binding information.
Displays client binding by Remote ID.
Displays summary bindings for proxy.
Displays client bindings by VRF name.
Modification
This command was introduced.
Operation
read
show dhcp ipv6 server binding
5.2.x
213