Show Lpts Punt Excessive-Flow-Trap Information - Cisco ASR 9000 Series Command Reference Manual

Excessive Punt Flow Trap Commands

show lpts punt excessive-flow-trap information

To display the Excessive Punt Flow Trap feature information, use the show lpts punt excessive-flow-trap
information command in the EXEC mode.
show lpts punt excessive-flow-trap information
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
lpts
basic-services
Examples This is an example of show lpts punt excessive-flow-trap information command with ARP and PPPoE
protocols configured with non-default values:
RP/0/RSP0/CPU0:router# show lpts punt excessive-flow-trap information
--------------------------------------------------------------
Global Default Values -
--------------------------------------------------------------
Protocol
--------
ARP
Police Rate: 10 pps
Penalty Timeout: 15 mins
Police
Rate (pps)
Default Config
--------------
10 15
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
show lpts punt excessive-flow-trap information
Modification
This command was introduced.
Operation
read
read, write
Penalty
Timeout (mins)
Default Config Punt Reasons
-------------- ----------------
15 2 ARP
Reverse ARP
5.2.x
263