Cisco Asr 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference - Cisco ASR 9000 Series Command Reference Manual

radius source-interface (BNG)
Task ID
Task ID
aaa
Examples
This example shows how to make RADIUS use the IP address of subinterface s2 for all outgoing RADIUS
packets:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# radius source-interface loopback 10 vrf vrf1

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,

Release 5.2.x
54
Operations
read, write
BNG AAA Commands