Pppoe Sessions Limit - Cisco ASR 9000 Series Command Reference Manual

PPPoE Commands

pppoe sessions limit

To set a limit for PPPoE sessions in a particular PPPoE BBA-Group, use the sessions limit command in
PPPoE BBA-Group configuration mode. To remove the specified limit for PPPoE sessions, use the no form
of this command.
sessions {access-interface| circuit-id| circuit-id-and-remote-id| inner-vlan| {mac| mac-iwf}
[access-interface]| max| outer-vlan| remote-id| vlan} limit limit-value [threshold threshold-value]
no sessions {access-interface| circuit-id| circuit-id-and-remote-id| inner-vlan| {mac| mac-iwf}
[access-interface]| max| outer-vlan| remote-id| vlan} limit limit-value [threshold threshold-value]
Syntax Description
access-interface
circuit-id
circuit-id-and-remote-id
inner-vlan
mac
mac-iwf
max
outer-vlan
remote-id
vlan
limit
limit-value
threshold
threshold-value
Command Default
None
Limits PPPoE sessions on any one access interface.
Limits PPPoE sessions with any one circuit-ID.
Limits PPPoE sessions by circuit-id and remote-id.
Limits PPPoE sessions with any one inner-vlan id.
Limits PPPoE sessions from any one mac address.
Limits IWF PPPoE sessions from any one mac address.
Sets a per-card session limit.
Limits PPPoE sessions with any one outer-vlan id.
Limits PPPoE sessions with any one remote-id.
Limits PPPoE sessions with matching vlan ids.
Specifies the action of limiting the PPPoE sessions for various attributes.
Specifies the session limit value.
The range is from 1 to 65535. The default is 65535.
Specifies the action of generating a log message when the threshold has
reached.
Specifies the threshold value.
The range is from 1 to 65535.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
pppoe sessions limit
5.2.x
457