Show Igmp Vrf (Bng) - Cisco ASR 9000 Series Command Reference Manual

Multicast Commands

show igmp vrf (BNG)

To show the igmp vrf specific information, use the show igmp vrf command in the EXEC mode.
show igmp vrf vrf_name{groups| interface| nsf| ranges| ssm| summary| traffic| unicast-qos-adjusted}
Syntax Description
vrf
vrf_name
groups
interface
nsf
ranges
ssm
summary
traffic
unicast-qos-adjusted
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
multicast
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Shows the vrf information for igmp unicast qos shaper.
Specifies the vrf name.
Shows the igmp group membership information.
Shows igmp interface information.
Shows igmp nsf status.
Shows igmp group-map ranges.
Shows ssm related information.
Shows igmp summary information.
Show igmp traffic counters.
Shows igmp unicast qos shaper.
Modification
This command was introduced.
Operation
read
show igmp vrf (BNG)
5.2.x
349