Cisco ASR 9000 Series Command Reference Manual page 463

PPPoE Commands
Setting a value of 0 for delay means that no transmission delay is set for the PADO message. Setting a value
of 10000 means that an infinite delay is set for PADO message; or, in other words, the PADO message is
never sent.
Within the category of service-name matches, full string matches are preferred to sub-string matches. If more
than one sub-string match occurs, the selection is based on a random order.
If there is neither a string match nor a sub-string match, the configured Circuit-ID delay is used (if a Circuit-ID
is present in PADI message), followed by the configured Remote-ID delay (if a Remote-ID is present in PADI
message).
If there are no matches, the configured pado delay is used for the PADO message.
Task ID
Task ID
ppp
Examples
This example shows how to configure a delay of 8000 milliseconds for the PADO message, if the Service-Name
received in the PADI message exactly matches the configured string (service1 in this example):
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# pppoe bba-group bba1
RP/0/RSP0/CPU0:router(config-bbagroup)# pado delay service-name string service1 8000
This example shows how to configure a delay of 5000 milliseconds for the PADO message, if the Service-Name
received in the PADI message contains the configured string (service in this example):
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# pppoe bba-group bba1
RP/0/RSP0/CPU0:router(config-bbagroup)# pado delay service-name contains service 5000
Related Commands
Command
pado delay, on page 442
pado delay circuit-id, on page 444
pado delay remote-id, on page 446
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Operation
read, write
Description
Configures a specific delay for PPPoE PADO message for a PPPoE
BBA-Group in BNG.
Configures a delay for PPPoE PADO message for a PPPoE BBA-Group
in BNG, based on the Circuit-ID received in PADI message.
Configures a delay for PPPoE PADO message for a PPPoE BBA-Group
in BNG, based on the Remote-ID received in PADI message.
pado delay service-name
5.2.x
449