Show Dhcp Ipv4 Proxy Profile - Cisco ASR 9000 Series Command Reference Manual

BNG DHCP Commands

show dhcp ipv4 proxy profile

To display Dynamic Host Configuration Protocol (DHCP) proxy profile information, use the show dhcp ipv4
proxy profile command in the EXEC mode.
show dhcp ipv4 proxy profile{name| profile_name| }
Syntax Description
name
profile_name
|
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command displays the proxy profiles created for DHCP IPv4.
Task ID
Task ID
ip-services
Examples
This is the sample output of the show dhcp ipv4 proxy profile command:
RP/0/RSP0/CPU0:router# show dhcp ipv4 proxy profile
The show dhcp ipv4 proxy profile output is as follows:
Wed Jan 23 17:05:49.760 IST
DHCP IPv4 Proxy Profiles
--------------------------
Displays the detailed proxy profile information.
Specifies the profile name.
Displays the output modifiers.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
Operations
read
show dhcp ipv4 proxy profile
5.2.x
201