▀ HNB-GW Service Configuration
Iuh Interface Configuration
Use the following example to configure the Iuh interfaces in source context:
configure
context <vpn_ctxt_name> -noconfirm
interface <intf_name>
ip address <ip_address>
end
Notes:
<
vpn_ctxt_name
<
intf_name
SS7 Routing Domain Configuration
Use the following example to configure the SS7 routing domain id for HNB-GW service on system:
configure
ss7-routing-domain <ss7rd_id> variant <v_type> -noconfirm
ssf {international | national | reserved | spare}
asp instance <asp_instance>
end-point address <end_point_address> context <end_ctxt_name>
end-point bind
end
Notes:
<
end_point_address
end-point parameters in a specific SS7 routing domain instance.
<
end_ctxt_name
process for M3UA end-point parameters in a specific SS7 routing domain instance.
Peer Server Id Configuration for PS Core Network
Use the following example to configure the Peer Server Id in SS7 routing domain for PS core network on system:
configure
ss7-routing-domain <ss7rd_id> variant <v_type>
▄ Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide
76
> is name of the source context in which HNB-GW service is to configure.
> is name of the interface which is to be used for Iuh reference between HNB-GW and HNB.
> is IP address of the end point associated with application server process for M3UA
> is name of the context which is associated with end point IP address for application server
HNB-GW Service Configuration Procedures
OL-25069-03