Monitoring From A Remote Site - Cisco 3521 Administrator's Manual

Monitoring from a Remote Site

Monitoring from a Remote Site
You can use the Gateway interface to monitor Cisco IPVC 3500 Series Gateway functions from a remote
site. The LEDs on the gateway front and rear panels are replicated on the LED Monitoring page in the
Gateway interface. You can access this page from any computer on the LAN and monitor the module for
connectivity or communication problems.
Procedure
Launch a Java-based web browser.
Step 1
In the address or URL field, enter the IP address of the gateway that you want to monitor.
Step 2
The Gateway interface appears.
In the User Name field, enter a valid user name.
Step 3
In the Password field, enter the user password.
Step 4
The Gateway Settings page appears.
Step 5 On the sidebar, click Board.
Click the LED Monitoring tab (if not already selected).
Step 6
The LED Monitoring tab appears.
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
5-6
Chapter 5 Troubleshooting the Cisco IPVC 3500 Series Gateway
Table 5-1 explains the LED that appear in this tab.
OL-7995-01