Access The Expressway User Interface; Using The Web User Interface; Using The Cli - Cisco Expressway CE1300 Installation Manual

Access the Expressway User Interface

This section describes how to access the Expressway Web User Interfaces and CLI. The interfaces are enabled
through the Install Wizard.
This chapter explains the following:
•
•
•

Using the Web User Interface

To log into the Web User Interface:
1. Open a browser window and in the address line type one of the following:
2. In the Login page, select Administrator login.
3. Login with username admin and your system password.
4. The Expressway Overview page is displayed.
More information
Detailed information about configuring and managing Expressway, including each page in the interface, is
provided in the Expressway online help and in the

Using the CLI

The command line interface is available over SSH and through the serial port by default:
1. Start an SSH session.
2. Enter the IP address or FQDN of the Cisco Expressway.
Using the Web User Interface, on page 25
Using the CLI, on page 25
Next Steps, on page 26
• IP address of the Cisco Expressway (for example, https://10.0.0.1). Enter the address as HTTPS.
• FQDN of the Cisco Expressway (for example, https://mydomain.example.com).
C H A P T E R
Cisco Expressway Administrator
Cisco Expressway CE1300 Appliance Installation Guide (X14.3.1)
9
Guide.
25