Session Redirection (Hotlining); Overview; License Requirements; Operation - Cisco ASR 5000 Administration Manual

Ip services gateway
Hide thumbs Also See for ASR 5000:
Table of Contents

Advertisement

▀ Session Redirection (Hotlining)

Session Redirection (Hotlining)
Important:

Overview

Session redirection provides a means to redirect subscriber traffic to an external server by applying ACL rules to the
traffic of an existing or a new subscriber session. The destination address and optionally the destination port of TCP/IP
or UDP/IP packets from the subscriber are rewritten so the packet is forwarded to the designated redirected address.
Return traffic to the subscriber has the source address and port rewritten to the original values. The redirect ACL may be
applied dynamically by means of the RADIUS Change of Authorization (CoA) feature.
Note that the session redirection feature is only intended to redirect a very small subset of subscribers at any given time.
The data structures allocated for this feature are kept to the minimum to avoid large memory overhead in the session
managers.

License Requirements

The Session Redirection (Hotlining) is a licensed Cisco feature. A separate feature license may be required. Contact
your Cisco account representative for detailed information on specific licensing requirements. For information on
installing and verifying licenses, refer to the Managing License Keys section of the Software Management Operations
chapter in the System Administration Guide.

Operation

ACL Rule

An ACL rule named readdress server supports redirection of subscriber sessions. The ACL containing this rule must
be configured in the destination context of the user. Only TCP and UDP protocol packets are supported. The ACL rule
allows specifying the redirected address and an optional port. The source and destination address and ports (with respect
to the traffic originating from the subscriber) may be wildcarded. If the redirected port is not specified, the traffic will be
redirected to the same port as the original destination port in the datagrams. For detailed information on configuring
ACLs, refer to the IP Access Control Lists chapter in the System Administration Guide. For more information on
readdress server, refer to the ACL Configuration Mode Commands chapter of the Command Line Interface Reference.

Redirecting Subscriber Sessions

An ACL with the readdress server rule is applied to an existing subscriber session through CoA messages from the
RADIUS server. The CoA message contains the 3GPP2-Correlation-ID, User-Name, Acct-Session-ID, or Framed-IP-
Address attributes to identify the subscriber session. The CoA message also contains the Filter-Id attribute which
specifies the name of the ACL with the readdress server rule. This enables applying the ACL dynamically to existing
subscriber sessions. By default, the ACL is applied as both the input and output filter for the matching subscriber unless
the Filter-Id in the CoA message bears the prefix in: or out:.
For information on CoA messages and how they are implemented in the system, refer to the
Authorization and Disconnect Message
▄ Cisco ASR 5000 IP Services Gateway Administration Guide
40
Functionality described for this feature in this segment is not applicable for HNB-GW sessions.
section.
CoA, RADIUS DM, and Session Redirection (Hotlining)
RADIUS Change of
OL-27210-02

Advertisement

Table of Contents
loading

Table of Contents