Show Ip Igmp Snooping Cpe Vlans - Cisco 300 Series Cli Manual

21
445
no ip igmp snooping vlan
Parameters
•
vlan-id
—Specifies the VLAN ID value. (Range: 1–4094).
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
You can execute the command before the VLAN is created.
Example
The following example enables IGMP snooping immediate-leave feature on VLAN
1.
switchxxxxxx(config)# ip igmp snooping vlan 1 immediate-leave

21.15 show ip igmp snooping cpe vlans

To display the CPE VLAN to Multicast TV VLAN mappings, use the show ip igmp
snooping cpe vlans command in User EXEC mode.
Syntax
show ip igmp snooping cpe vlans [vlan
Parameters
•
vlan-id
vlan —(Optional) Specifies the CPE VLAN ID.
Command Mode
User EXEC mode
vlan-id
immediate-leave
vlan-id
]
OL-32830-01 Command Line Interface Reference Guide
IGMP Snooping Commands