Technical Specifications - Optical Systems Design OSD2700SFP SERIES Operator's Manual

2.3

TECHNICAL SPECIFICATIONS

SPECIFICATION
24 x SFP Ports
Standards
Optical connector
SFP Port Options
4 x RJ45/SFP Combo Ports
Standards
Optical Connector
Electrical Connector
SFP Port Options
Optical Data Interface
Transmitter Wavelength
Transmit Optical Power
Receiver Sensitivity
Standard Optical Link Budget
Optional Optical Link Budget
Operating Mode
Common
Standards
Indicators
Configuration Connector
Dimensions (mm)
Weight
Power Requirements
Operating Temperature
Relative Humidity
PAGE 11
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
TABLE 2: TECHNICAL SPECIFICATIONS
IEEE802.3u
LC Standard
100Base-SFP (Contact OSD for SFP options)
IEEE802.3i, IEEE802.3ab for 10, 100 or 1000Base-T Ethernet
LC Standard
RJ45
1000Base-Lx, 10/100/1000Base-T (Contact OSD for SFP options)
IEEE802.3z, 100Base-Lx, 1000Base-Sx, IEEE802.3u, 100Base-Fx
Refer to OSD SFP datasheets or contact OSD sales for options
Optical link budgets are SFP dependant. Refer to OSD SFP data sheets or
contact OSD sales for options/details.
Half or full duplex for 10/100
Full duplex for 1000
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
IEC61850-3/IEEE1613 for power substations & EN50121-4 for railway
applications
1x Power
24x 100Base-T, 100BaseFx: Link/Activity
4x 10/100/1000Base-T, 100Base-Sx, 1000Base-Lx: Link/Activity
DB9
442W x 250D x 44H
4.1kg
90-264V @ 45VA Max
AC
-10°C to +60°C
5 to 95% non-condensing
PERFORMANCE
DOC ID: 10112704