Optical Systems Design OSD2700SFP SERIES Operator's Manual page 89

PORT-BASED AUTHENTICATION
1. Interface: Click "Interface" drop-down menu from "Interface" drop-down list to choose the port to
be set port-based authentication.
2. Authentication State: Click "Authentication State" drop-down menu from "Authentication State"
drop-down list to choose "Enable" or "Disable" to enable or disable authentication state.
3. Port Control: Click "Port Control" drop-down menu from "Port Control" drop-down list to choose
"Auto", "Force Authorized", or "Force Unauthorized" to force a port state. "Auto" specifies to
enable authentication on port. "Force Authorized" specifies to force a port to always be in an
authorized state. "Force Unauthorized" specifies to force a port to always be in an unauthorized
state.
4. Periodic Reauthentication: Click "Periodic Reauthentication" drop-down menu from "Periodic
Reauthentication" drop-down list to choose "Enable" or "Disable" to enable or disable periodic
reauthentication.
5. Reauthentication Period <1-4294967295>: Click in the "Reauthentication Period" textbox and
specify the seconds between reauthorization attempts. The default time is 3600 seconds.
6. Update Setting: Click "Update Setting" button when you finished port-based authentication
setting.
PAGE 89
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704