Diagnostics - Optical Systems Design OSD2700SFP SERIES Operator's Manual

7.3

DIAGNOSTICS

Utilization, System Log, Remote Logging, ARP Table, Route Table, Alarm Setting
UTILIZATION
CPU Utilization:
1. Command Mode: Exec mode
Logon to Exec Mode (View Mode).
The switch_a> prompt will show on the screen.
switch_a>
2. Usage:
Use the show cpu-usage command to show the CPU usage.
3. Command Syntax:
show cpu-usage
4. Example:
The following example shows the CPU usage:
switch_a>show cpu-usage
Memory Utilization:
1. Command Mode: Exec mode
Logon to Exec Mode (View Mode).
The switch_a> prompt will show on the screen.
switch_a>
2. Usage:
Use the show memory-usage command to show the memory usage.
3. Command Syntax:
show memory-usage
4. Example:
The following example shows the memory usage:
switch_a>show memory-usage
System Log
1. Command Mode: Exec mode or Privileged Exec mode
Logon to Exec Mode (View Mode) or Privileged Exec Mode (Enable Mode).
The switch_a> or switch_a# prompt will show on the screen.
switch_a>
switch_a#
2. Usage:
Use the show system-log command to show system log.
3. Command Syntax:
show system-log
PAGE 129
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704