Table of Contents
Advertisement
GVRP
GVRP Global Setting:
1.
GVRP: Click "GVRP" drop-down menu from "GVRP" drop-down list to choose "Enable" or
"Disable" to enable or disable GVRP (GARP VLAN Registration Protocol).
2.
Dynamic VLAN Creation: Click "Dynamic VLAN Creation" drop-down menu from "Dynamic
VLAN Creation" drop-down list to choose "Enable" or "Disable" to enable or disable Dynamic
VLAN Creation. GARP (Generic Attribute Registration Protocol) provides IEEE802.1Q compliant
VLAN pruning and dynamic VLAN creation on IEEE802.1Q trunk ports.
3.
Update Setting: Click "Update Setting" button when you finished GVRP Global Setting.
Per Port Setting (include LAG):
1.
GVRP: Click "GVRP" drop-down menu from "GVRP" drop-down list to choose "Enable" or
"Disable" to enable or disable GVRP for the port.
2.
GVRP Applicant: Click "GVRP Applicant" drop-down menu from "GVRP Applicant" drop-down
list to choose "Active" or "Normal" to the port. Ports in the GVRP active applicant state send
GVRP VLAN declarations when they are in the STP (Spanning Tree Protocol) blocking state,
which prevents the STP bridge protocol data units (BPDUs) from being pruned from the other
port. Ports in the GVRP normal applicant state do not declare GVRP VLANs when in the STP
blocking state.
3.
GVRP Registration: Click "GVRP Registration" drop-down menu from "GVRP Registration"
drop-down list to choose "Enable" or "Disable" to enable or disable GVRP Registration to the
port. Configuring an IEEE802.1Q trunk port in registration mode allows dynamic creation (if
dynamic VLAN creation is enabled), registration, and deregistration of VLANs on the trunk port.
4.
Update Setting: Click "Update Setting" button when you finished Per Port Setting.
PAGE 95
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
Advertisement
Table of Contents
