Table of Contents
Advertisement
Mode" drop-down list to choose "Disable", "Weekday", or "Date" to choose disable, weekday, or
date daylight saving for the Switch.
2. Time Set Offset (1-1440 min): Click in the "Time Set Offset" textbox and specify the offset time of
daylight saving. For example enter 60 for one hour offset.
3. Name of Daylight Saving Tmiezone: Click in the "Name of Daylight Saving Tmiezone" textbox
and specify the name of daylight saving timezone. This can be any given name in 14-character
alpha-numericals. Enter the name of Daylight-Saving time zone using the following example:
EDT - East Daylight Saving Time Zone.
CDT - Central Daylight-Saving Time Zone.
MDT - Mountain Daylight-Saving Time Zone.
PDT - Pacific Daylight-Saving Time Zone.
ADT - Alaska Daylight-Saving Time Zone.
4. Weekday: Click in the textboxes and specify the daylight saving period.
•
Month: Click "Month" drop-down menu from "Month" drop-down list to choose from
January to December.
•
Week: <1-5> Specifies starting/ending week of daylight savings time.
•
Day: Click "Day" drop-down menu from "Day" drop-down list to choose from Sunday to
Saturday.
•
Hour: <0-23> Specifies from 0 to 23.
•
Minute: <0-59> Specifies from 0 to 59.
5. Date: Click in the textboxes and specify the daylight saving period.
•
Month: Click "Month" drop-down menu from "Month" drop-down list to choose from
January to December.
•
Day: <1-31> Specifies from 1 to 31.
•
Hour: <0-23> Specifies from 0 to 23.
•
Minute: <0-59> Specifies from 0 to 59.
6. Update Setting: Click "Update Setting" button when you finished Daylight Saving Setting.
<Note> The "Week", "Hour", "Minute", and "Day" fields would not accept the alphabetic
characters (Like Jan, Feb, sun, mon). They only accept the two digit numbers (0 throught 9).
PAGE 100
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
Advertisement
Table of Contents
