Optical Systems Design OSD2700SFP SERIES Operator's Manual page 26

IP ADDRESS
1. IP Address: Click in "IP Address" text box and type a new address to change the IP Address.
2. IP Subnet Mask: Click in "IP Subnet Mask" text box and type a new address to change the IP
Subnet Mask.
3. Submit: Click "Submit" button when you finished these selections.
4. You need to enter the new IP address on the browser and reconnect to the switch after IP or
subnet mask are changed.
5. Default Gateway: Click "Default Gateway" drop-down menu to choose "Disable" or "Enable"
from the "Default Gateway" drop-down list to disable or enable Default Gateway Setting for
the switch.
6. Click the text box and type a new address to change the Default Gateway. (Need to choose
"Enable" from the "Default Gateway" drop-down menu.)
7. Submit: Click "Submit" button when you finished Default Gateway.
PAGE 26
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704