Optical Systems Design OSD2700SFP SERIES Operator's Manual page 201

4. Example:
The following example sets Link Layer Discovery Protocol (LLDP) Link Aggregation Type Length
Value (TLV) on the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#lldp tlv-global link-aggregation
switch_a(config-if)#
LLDP NEIGHBORS
1. Command Mode: Exec mode or Privileged Exec mode
Logon to Exec Mode (View Mode) or Privileged Exec Mode (Enable Mode).
The switch_a> or switch_a# prompt will show on the screen.
switch_a>
switch_a#
2. Usage:
Use the show lldp neighbors command to show Link Layer Discovery Protocol (LLDP) neighbors
information.
3. Command Syntax:
show lldp neighbors
4. Example:
The following example shows Link Layer Discovery Protocol (LLDP) neighbors information:
switch_a> show lldp neighbors
LLDP STATISTICS
1. Command Mode: Exec mode or Privileged Exec mode
Logon to Exec Mode (View Mode) or Privileged Exec Mode (Enable Mode).
The switch_a> or switch_a# prompt will show on the screen.
switch_a>
switch_a#
2. Usage:
Use this command to show Link Layer Discovery Protocol (LLDP) statistics.
3. Command Syntax:
show lldp statistics
show lldp statistics IFNAME
IFNAME Interface name.
4. Example:
The following example shows Link Layer Discovery Protocol (LLDP) statistics:
switch_a> show lldp statistics
PAGE 201
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704