Table of Contents
Advertisement
LACP Trunking
Trunk Configuration:
1.
Port: Click "Port" drop-down menu to choose port from "Port" drop-down list.
2.
Trunk Type: Click "Trunk Type" drop-down menu to choose "None", "Static", or "LACP" from
"Trunk Type" drop-down list to disable or enable Static or LACP Trunk.
3.
Admin Key: Click in "Admin Key" text box and type a decimal number 1-6 for FE ports. Type a
decimal number 7-8 for GE ports.
4.
LACP Mode: Click "LACP Mode" drop-down menu to choose "Active" or "Passive" from "LACP
Mode" drop-down list to enable Active or Passive LACP Mode.
5.
LACP Port Priority (Set 0 for None): Click in "LACP Port Priority" text box and type 1-65535 for
port. Default value is 32768.
6.
LACP Timeout: Click "LACP Timeout" drop-down menu to choose "Long" or "Short" from
"LACP Timeout" drop-down list to enable Long or Short LACP Timeout. Long timeout value is
90 seconds. Short timeout value is 3 seconds.
7.
Update Setting: Click "Update Setting" button when you finished Trunk Configuration.
8.
LACP System Priority (1-65535, default 32768): Click in "LACP System Priority" text box and
type 1-65535. Default value is 32768.
9.
Submit: Click "Submit" button when you finished LACP System Priority settings.
PAGE 50
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
Advertisement
Table of Contents
