Technical Specifications - Optical Systems Design OSD2892 Quick Start Manual

2.4

TECHNICAL SPECIFICATIONS

SPECIFICATION
Electrical Data Interface
Electrical Data Connector
OSD2892P PoE
Configuration Connector
Alarms
Alarm Interface
Control
Optical Port Connector
Trunk/Uplink Ports Optical
Interface
Operating Mode
Indicators
SFP Options
Operating Temperature
Relative Humidity
OSD2892DC
OSD2892AC
Power
Requirements
OSD2892DAC 90 to 264V
OSD2892P
OSD2892P PoE Power Budget
Dimensions of Module (mm)
Weight (kg)
PAGE 5
OPTICAL SYSTEMS DESIGN
TABLE 1: TECHNICAL SPECIFICATIONS
IEEE802.3i/802.3u/802.3ab, 10/100/1000Base-T Ethernet
RJ45 on the fixed copper ports for OSD2892 and OSD2892P
IEEE802.3af: 47 to 55V
IEEE802.3at: 47 to 55V
Mini USB console Port
Four: 2 for Power Supply Status, 2 user definable via the GUI
4 opto-isolated relay drivers via two 4-way 3.5mm terminal blocks
System reset
Dual LC on 2-fiber SFP modules or SC on 1-fiber SFP modules
IEEE802.3ae for 10GBASE-SR (MM: 300m), 10GBASE-LR (SM: 10km),
10GBASE_ER (SM: 40km), 10GBASE_ZR (SM: 80km), IEEE802.3z
1000Base-Lx/Sx
Half or full duplex for 10/100
Full duplex for 1G, 2.5G and 10G
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
1 x power
36 x 10/100/1000Base-T: Link Activity
36 x 10/100/10001000Base-T: Speed
4 x 10G Link/Activity/Speed
36 x 10/100/1000Base-T: PoE (OSD2892P only)
See OSD Datasheets #1010000X and #10210G00X for full details on available
optical SFP modules
-20°C to +60°C
5 to 95% non-condensing
10 to 36V @ 45VA Max via one 4-way 5.08mm terminal block
DC
90 to 264V @ 50VA Max via integrated IEC power inlet module
AC
@ 55VA Max via two integrated IEC power inlet modules
AC
47-57 V @ 50VA Max (without PoE) & @ 450VA Max (with PoE0 via one
DC
4-way 5.08mm terminal block
750W maximum
440W x 300D x 44H
4.9 for OSD2892, 5.1 for OSD2892P
OSD2892 QUICK START GUIDE
PERFORMANCE
@ 0.35Amp maximum
DC
@ 0.70Amp maximum
DC
102289205
DOC ID: 10118602