Table of Contents
Advertisement
CHAIN SETTING
Chain Protocol:
1.
Click "Enable" to enable Chain Protocol for ports.
2.
Submit: Click "Submit" button when you finished Chain Protocol setting.
Global Setting:
1.
VLAN (1-4094, default:1): Click in the "VLAN" textbox and specify a VLAN ID number from 1
~ 4094.
2.
Priority (1-255, default:128): Set the Switch priority for running chain protocol. Switch with lower
priority will run as Master (forwarding) port.
3.
Timeout Count (3-255, default:5): Set the Switch timeout count for running chain protocol.
Chain recovery time = (Chain Timeout Count – 1) x 200ms.
Default Chain recovery time = (5 – 1) x 200ms = 800ms.
4.
Storm Control (broadcast and multicast): Click "Storm Control (broadcast and multicast)" drop-
down menu to choose "Enable" or "Disable" from "Storm Control (broadcast and multicast)"
drop-down list to enable or disable Storm Control (broadcast and multicast) for Chain Protocol
setting.
5.
Submit: Click "Submit" button when you finished Chain Protocol setting.
PAGE 62
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
Advertisement
Table of Contents
