Optical Systems Design OSD2700SFP SERIES Operator's Manual page 214

Managed 24-port 100base sfp and 4- combo port gigabit ethernet switch
Table of Contents

Advertisement

Use this command to set GMRP registration type for all ports for a given bridge.
3.
Command Syntax:
set gmrp registration normal
normal Specify dynamic GMRP multicast registration and deregistration on the port.
fixed Specify the multicast groups currently registered on the switch are applied to the port, but any
subsequent registrations or deregistrations do not affect the port. Any registered multicast groups on
the port are not deregistered based on the GARP timers.
forbidden Specify that all GMRP multicasts are deregistered, and prevent any further GMRP multicast
registration on the port.
IF_NAME Defines a text string used as the name of the interface; ASCII string from 1 to 16
characters.
4.
Example:
The following example sets interface fe1 (port 1) to normal registration:
switch_a(config)#set gmrp registration normal fe1
switch_a(config)#
GMRP Forward All:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2.
Usage:
Use this command to set the GMRP forward all option for an interface.
3.
Command Syntax:
set gmrp fwdall enable
IF_NAME Interface name.
4.
Example:
The following example enables GMRP forwarding on a Layer-2 switch for interface fe1 (port 1):
switch_a(config)#set gmrp fwdall enable fe1
switch_a(config)#
Set GMRP Timer:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2.
Usage:
Use this command to set the values for the GMRP Join, Leave, and Leaveall timers for a specified
bridge. The default is the join timer (200 milliseconds); the leave timer is 600 milliseconds (ms); and
the leaveall timer is 10000 milliseconds (ms).
3.
Command Syntax:
set gmrp timer [join
l eave
join Type of timer
PAGE 214
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
f ixed
f orbidden IF_NAME
d isable IF_NAME
l eaveall] TIMER_VALUE IF_NAME
DOC ID: 10112704

Advertisement

Table of Contents
loading

Table of Contents