Osd2700 Front And Rear Panels - Optical Systems Design OSD2700SFP SERIES Operator's Manual

OPTICAL SYSTEMS DESIGN
2.4

OSD2700 FRONT AND REAR PANELS

There are 24 fixed 100M SFP ports, four fixed Gigabit copper ports and four optional Gigabit SFP
ports which can be either copper or fiber on the front panel. The rear panel consists of a DB9
configuration connector and an IEC power. Each section will be described further throughout this
manual.
*Note: The 4 SFP ports and 4 fixed Copper ports are Gigabit combo ports. It is possible to use either
the RJ45 port or the SFP port per channel (G1, G2, G3, G4). ie It is not possible to use both at the same
time.
4 x SFP Combo
Port*
4 x Copper
24 x 10/100Base
Combo Port*
SFP Ports
DB9
IEC Power Connector
Configuration
+ Fuse and Switch
Connector
FIGURE 7: OSD2700SFP FRONT AND REAR PANELS
2.4.1 OSD2700SFP DIMENSIONS
The OSD2700SFP is designed to be mounted onto a 19" rack unit occupying 1RU space or can be free
standing on an even surface.
44
442
DOC ID: 10112704
PAGE 12
OSD2700SFP OPERATOR MANUAL