Table of Contents
Advertisement
IP Access List (Extended):
1.
Access List Type: Click "Access List Type" drop-down menu to choose "IP Access List
(Extended)" from the "Access List Type" drop-down list to create new IP Access List (Extended)
or modify an IP Access List (Extended).
2.
Access List: Click "Access List" drop-down menu to choose "Create" or "Access List" from the
"Access List" drop-down list to create new Access List or modify an Access List.
3.
Access List (100-199/2000-2699): Click in the "Access List (100-199/2000-2699)" textbox and
specify an IP Access List (Extended) number 100 ~ 199 or 2000 ~ 2699 for Access List.
4.
Action: Click "Action" drop-down menu from "Action" drop-down list to choose "permit" or
"deny" to permit or deny certain traffic if conditions matched.
5.
Source Address: Click in the "Source Address" textbox and specify the IP address of originating
network or host sending packet.
Source Wildcard Bits: Click in the "Source Wildcard Bits" textbox and specify the Wildcard bits
6.
in dotted decimal notation to apply to the source. Ones go in bit positions to ignore.
Example: Source Address: 192.168.1.10. Source Wildcard Bits: 0.0.0.3. Then Source IP address
192.168.1.8 ~ 192.168.1.11 would be permitted or denied.
Port (1-65535): Click in the "Port (1-65535)" textbox and specify a TCP/UDP Port number 1 ~
7.
65535 for Access List.
8.
Destination Address: Click in the "Destination Address" textbox and specify the IP address of host
receiving packet.
9.
Destination Wildcard Bits: Click in the "Destination Wildcard Bits" textbox and specify the
Wildcard bits in dotted decimal notation to apply to the destination. Ones go in bit
positions to ignore.
Example: Destination Address: 192.168.1.20. Destination Wildcard Bits: 0.0.0.255. Then
Destination IP address 192.168.1.0 ~ 192.168.1.255 would be permitted or denied.
10. Port (1-65535): Click in the "Port (1-65535)" textbox and specify a TCP/UDP Port number 1 ~
65535 for Access List.
11. Add: Click "Add" button to add IP Access List (Extended) number.
12. Submit: Click "Submit" button when you finished ACL Configuration settings.
PAGE 78
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
Advertisement
Table of Contents
