Optical Systems Design OSD2700SFP SERIES Operator's Manual page 212

MINUTE <0-59> Specifies from 0 to 59.
OFFSET <1-1440> Specifies from 1 to 1440 minutes.
clock summer-time TIMEZONE date DAY MONTH HOUR MINUTE DAY MONTH HOUR
MINUTE OFFSET
TIMEZONE Specifies the daylight saving timezone.
DAY <1-31> Specifies from 1 to 31.
MONTH <1-12> Specifies from January to December.
HOUR <0-23> Specifies from 0 to 23.
MINUTE <0-59> Specifies from 0 to 59.
OFFSET <1-1440> Specifies from 1 to 1440 minutes.
no clock summer-time
4. Example:
The following example sets clock summer-time TIMEZONE (onehour) as daylight saving offset 60
minutes from 4 April AM0:00 to 31 October AM0:00:
switch_a(config)#clock summer-time onehour date 4 4 0 0 31 10 0 0 60
switch_a(config)#
GMRP
Clear GMRP Statistics:
1. Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a#
2. Usage:
Use this command to clear GMRP statistics for a given VLAN or all the VLANs configured on the
Layer-2 switch. This default clearing is for all the configured VLANs.
3. Command Syntax:
clear gmrp statistics [all
all Clear GMRP statistics for all the VLANs.
VLANID vlanid <1 to 4094> Clear GMRP statistics for the particular VLAN ID.
BRIDGE_NAME Bridge instance name.
4. Example:
The following example clears the GMRP statistics for VLAN 12 on bridge 1:
switch_a#clear gmrp statistics vlanid 12 bridge 1
switch_a#
The following example clears the GMRP statistics for all the configured VLANs on bridge 1:
switch_a#clear gmrp statistics all bridge 1
switch_a#
Set GMRP:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
PAGE 212
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
∣ v lanid VLANID] bridge BRIDGE_NAME
DOC ID: 10112704