Table of Contents
Advertisement
1.3
TECHNICAL SPECIFICATIONS
SPECIFICATION
Electrical Data Interface
Electrical Data Connector
Data Rates
Operating Mode
Ports 3, 4, 5
Optical Data Interface
Transmitter Wavelength
Transmit Optical Power
Receiver Sensitivity
Standard Optical Link Budget
Optional Optical Link Budget
Indicators
Dimensions (mm)
Weight
Power Requirements
Operating Temperature
Relative Humidity
Chassis Current Consumption
(CCC)
PAGE 6
OPTICAL SYSTEMS DESIGN
TABLE 1: TECHNICAL SPECIFICATIONS
IEEE802.3i 10Base-T, IEEE802.3u 100Base-T, 8023ab 1000Base-T
RJ45 for fixed copper (ports 1 and 2) and SFP modules for port 3,4,5
10, 100, 1000Mbps for copper
100, 1000Mbps (dip-switch selectable) for fiber SFP modules (ports 3, 4, 5)
Half or full duplex for 10/100
Full duplex for 1000
Pause frames based flow control
1000Base-Lx/Sx, 100Base-Fx, 10/100/1000Base-T
IEEE802.3z 1000Base-Lx/Sx or IEEE802.3u 100Base-Fx
1310nm ±30nm for 1000Base-Lx or 100Base-Fx
850nm ±40nm for 1000Base-Sx
>-10dBm to –4dBm (-5dBm and +2dBm @ 1310nm and 1550nm are optional)
<-21dBm
>11dB: >800m on multimode fiber @ 1310nm (Fiber bandwidth limited)
>20km on singlemode fiber @ 1310nm
>40km on singlemode fiber @ 1550nm
>23dB: >100km on singlemode fiber with optional 1550nm devices
1x Power
2x Copper Speed/Activity/Link on 2 x RJ45
2x Copper Duplex on 2x RJ45
3x SFP Speed/Activity/Link for copper or fiber
114W x 173D x 31H (module)
25W x 208D x 100H (card)
0.5kg (module), 0.3kg (card)
+8V to +35V
DC
-20°C to +75°C
0 to 95% non-condensing
0.80 Amp when fully optioned
OSD2144A OPERATOR MANUAL
PERFORMANCE
or 22 to 28V
@ 10VA (with 3x SFPs loaded)
AC
1022144A01
DOC ID: 10109603
Advertisement
Table of Contents
