Table of Contents
Advertisement
1.2
TECHNICAL SPECIFICATIONS
SPECIFICATION
Electrical Data Interface
Electrical Data Rate
Jumbo Frame Support
Optical Data Interface
Optical Data Rate
Operating Mode
Electrical Data Connectors RJ45
Alarms
Alarm Interface
PoE
Operating Mode
Optical Port Connectors
SFP Options
Indicators
Dimensions (mm)
Weight
Power Requirements
Power Connector
Alarm Connector
Operating Temperature
Relative Humidity
PAGE 7
OPTICAL SYSTEMS DESIGN
TABLE 1: TECHNICAL SPECIFICATIONS
IEEE802.3i/802.3u/802.3ab/802.3af/802.3at, 10/100/1000Base-T Ethernet
10, 100, 1000Mbps with energy detect, auto negotiate, auto MDIX
10KB
IEEE802.3z 1000Base-Lx/Sx or IEEE802.3u 100Base-Fx
100Mbps or 1000Mbps user selectable
Ring or non-ring user selectable
Half or full duplex for 10/100
Full duplex for 1000
Pause frames for 1000Mbps flow control
Ring to Bus
High Temperature
Optoisolated MOSFET rated at 100mA @ 46V maximum
IEEE802.3af, IEEE802.3at and PoE++
Alternative A & B (Pins 1/2, 3/6, 4/5 and 7/8)
SFP
Short haul, long haul, single fiber operation, etc.
Please consult OSD DATASHEET #100210000x or contact OSD
4x Copper Link
4x Copper Activity
4x PoE Operation on RJ45s
2x SFP Speed/Activity/Link on SFPs
1x Power/temperature Alarm
1x Initialise/Ring/Bus
43W x 91D x 130H
0.58kg
46 to 57V
@ 1.5A maximum (attached powered device dependant)
DC
>52V
recommended for PoE+ or ≥55V
DC
4 way 5.08mm terminal block
4 way 3.5mm terminal block
-20°C to +75°C
0 to 95% non-condensing
OSD2254P OPERATOR MANUAL
PERFORMANCE
for 60W
DC
DOC ID: 10115206
1022254P02
Advertisement
Table of Contents
