Table of Contents
Advertisement
OPTICAL SYSTEMS DESIGN
BASIC COMMANDS
Exec Mode (or View Mode) is the base mode from where users can perform basic commands like:
clear, debug, disable, enable, exit, help, logout, no, quit, show, terminal
The CLI contains a text-based help facility. Access this help by typing in the full or partial command
string then typing a question mark "?". The CLI displays the command keywords or parameters along
with a short description.
At the switch_a> prompt just press <?> to list the above basic commands.
switch_a>?
DOC ID: 10112704
PAGE 107
OSD2700SFP OPERATOR MANUAL
Advertisement
Table of Contents
