Table of Contents
Advertisement
MSTP PORT SETTING
Port Instance Configuration
1.
Instance ID: Click "Instance ID" drop-down menu to choose instance ID from "Instance ID" drop-
down list.
2.
Click ports to assign ports to the corresponding instance ID.
3.
Update Setting: Click "Update Setting" button when you finished Port Instance Configuration.
Instance ID
1.
Instance ID: Click "Instance ID" drop-down menu to choose instance ID from "Instance ID" drop-
down list.
MSTP Port Configuration
1.
Port: Click "Port" drop-down menu to choose port from "Port" drop-down list.
2.
Priority(Granularity 16): Click in "Priority" text box to set the port priority for a bridge group. The
Multiple Spanning Tree Protocol uses port priority as a tiebreaker to determine which port should
forward frames for a particular instance on a LAN, or which port should be the root port for an
instance. A lower value implies a better priority. In the case of the same priority, the interface
index will serve as the tiebreaker, with the lower-numbered interface being preferred over others.
The permitted range is 0-240. The priority values can only be set in increments of 16.
3.
Admin. Path Cost: Click in "Admin. Path Cost" text box to set the cost of a path associated with an
interface.
4.
Update Setting: Click "Update Setting" button when you finished MSTP Port Setting.
PAGE 59
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
Advertisement
Table of Contents
