Optical Systems Design OSD2700SFP SERIES Operator's Manual page 127

REBOOT
1. Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a#
2. Usage:
Use reload command to restart switch.
3. Command Syntax:
reload
4. Example:
The following example specifies restarting switch:
switch_a#reload
switch_a login:
LOGOUT
1. Command Mode: Exec mode or Privileged Exec mode
Logon to Exec Mode (View Mode) or Privileged Exec Mode (Enable Mode).
The switch_a> or switch_a# prompt will show on the screen.
switch_a>
switch_a#
2. Usage:
Use logout command to exit from the Exec mode or Privileged Exec mode.
3. Command Syntax:
logout
PAGE 127
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704