Optical Systems Design OSD2700SFP SERIES Operator's Manual page 99

NTP
Adjust RTC Time:
1. Click in textbox and specify the Year, Month, Day, Hour, Minute, and Second.
2. Update Setting: Click "Update Setting" button when you finished Adjust RTC Time.
NTP Setting:
1. NTP Status: Click "NTP Status" drop-down menu from "NTP Status" drop-down list to choose
"Enable" or "Disable" to enable or disable NTP for the Switch.
2. NTP Server (IP Address or Domain name): Click in the "NTP Server" textbox and specify the IP
address or Domain name of NTP server.
3. Sync Time: Click "Sync Time" button to synchronize time with NTP server.
4. Time Zone: Click "Time Zone" drop-down menu from "Time Zone" drop-down list to set time
zone.
5. Polling Interval (1-10080 min): Click in the "Polling Interval" textbox and specify the polling
interval.
6. Update Setting: Click "Update Setting" button when you finished NTP Setting.
Daylight Saving Setting:
1. Daylight Saving Mode: Click "Daylight Saving Mode" drop-down menu from "Daylight Saving
PAGE 99
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704