Table of Contents
Advertisement
Loopback Detect
General Setting:
1.
LoopBack Detect: Click "LoopBack Detect" drop-down menu to choose "Disable (default)" or
"Enable" from "LoopBack Detect" drop-down list to disable or enable a loopback detection on a
port interface.
2.
LoopBack Detect Action: Click "LoopBack Detect Action" drop-down menu to choose "None
(default)" or "Error Disable" from "LoopBack Detect Action" drop-down list to disable or enable
error disable LoopBack Detect Action on a port interface.
3.
Error Disable Recovery (0-65535 seconds): Click the text box and type a decimal number as error
disable recovery time in seconds. The default value is 0 second (no recovery).
4.
Interval (1-65535 seconds): Click the text box and type a decimal number as loopback detect
interval time in seconds. The default value is 1 second.
5.
Update Setting: Click "Update Setting" button when you finished General Setting.
1.
Mode: Click "Mode" drop-down menu to choose "Enable" or "Disable (default)" from "Mode"
drop-down list to enable or disable LoopBack Detect for port interface.
2.
Update Setting: Click "Update Setting" button when you finished LoopBack Detect settings for
port interface.
PAGE 44
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
Advertisement
Table of Contents
