Optical Systems Design OSD2700SFP SERIES Operator's Manual page 65

ADVANCED SETTING
Advanced Bridge Configuration:
Bridge bpdu-guard cofiguration: Click "Bridge bpdu-guard cofiguration" drop-down menu to
1.
choose "Enable" or "Disable" from "Bridge bpdu-guard cofiguration" drop-down list to enable or
disable the portfast ports to guard against bpdu received for a bridge. When the BPDU Guard
feature is set for a bridge, all portfast-enabled ports of the bridge that have bpdu-guard set to
default shut down the port on receiving a BPDU. In this case, the BPDU is not processed.
Error disable timeout cofiguration: Click "Error disable timeout cofiguration" drop-down menu to
2.
choose "Enable" or "Disable" from "Error disable timeout cofiguration" drop-down list to enable
or disable the timeout mechanism for the port to be enabled back for a bridge.
Interval (10..1000000 sec), Default: 300: Click the text box and type a decimal number as interval
3.
time in seconds after which port shall be enabled for a bridge.
Advanced Per Port Configuration:
1. Portfast configuration / status: Click and choose "Disable" or "Enable" to disable or enable a port
as an edge-port to enable rapid transition.
2. Bpdu-guard configuration: Click "Bpdu-guard configuration" drop-down menu to choose
"Enable", "Disable", or "Default" from "Bpdu-guard configuration" drop-down list to enable,
disable, or default the BPDU Guard feature on a port. This command supersedes the bridge level
configuration for the BPDU Guard feature. When the enable or disable parameter is used with this
command, this configuration takes precedence over bridge configuration. However, when the
default parameter is used with this command, the bridge level BPDU-Guard configuration takes
effect.
3. Submit: Click "Submit" button when you finished Advanced Setting.
PAGE 65
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704