Table of Contents
Advertisement
RSTP PORT SETTING
1.
STP Version: Click "STP Version" drop-down menu to choose "RSTP" from "STP Version" drop-
down list.
2.
Port: Click "Port" drop-down menu to choose port from "Port" drop-down list.
3.
Priority(Granularity 16): Click in "Priority" text box and enter a value between 0 and 240 to set the
priority for the port. A higher priority will designate the port to forward packets first. A lower
number denotes a higher priority. This entry must be divisible by 16. The default priority setting is
128.
4.
Admin. Path Cost: Click in "Admin. Path Cost" text box and enter a value between 0 and 2000000
to set the Admin. Path Cost for the port. 0 (auto) - Setting 0 for the Admin. Path Cost will
automatically set the speed for forwarding packets to the port for optimal efficiency. Default port
cost: 100Mbps port = 200000. Gigabit port = 20000.
5.
Point to Point Link: Click "Point to Point Link" drop-down menu to choose "Enable" or "Disable"
from "Point to Point Link" drop-down list to enable or disable Point to Point Link for the port.
6.
Edge Port: Click "Edge Port" drop-down menu to choose "Enable", "Disable", or "Auto" from
"Edge Port" drop-down list to set Enable, Disable, or Auto Edge Port for the port.
7.
Update Setting: Click "Update Setting" button when you finished RSTP Port Setting.
PAGE 52
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
Advertisement
Table of Contents
