Optical Systems Design OSD2700SFP SERIES Operator's Manual page 77

Managed 24-port 100base sfp and 4- combo port gigabit ethernet switch
Table of Contents

Advertisement

ACL CONFIGURATION
Policy Map Setting:
1.
Policy Map: Click "Policy Map" drop-down menu to choose "Create" or "Policy Map Name" from
the "Policy Map" drop-down list to create new Policy Map or modify a Policy Map.
Policy Map Name: Click in the "Policy Map Name" textbox and specify a Policy Map Name.
2.
Attach Class Map to Policy Map:
1.
Class Name: Click "Class Name" drop-down menu to choose "Create" or "Class Name" from the
"Class Name" drop-down list to create new Class Name or modify a Class Name.
2.
Police Rate (1-1000000kbps): Click in the "Police Rate" textbox and specify an average traffic rate
(kbps).
3.
Burst (1-20000 Bytes): Click in the "Burst" textbox and specify a normal burst size (bytes).
IP Access List:
1.
Access List Type: Click "Access List Type" drop-down menu to choose "IP Access List" from the
"Access List Type" drop-down list to create new IP Access List or modify an IP Access List.
2.
Access List: Click "Access List" drop-down menu to choose "Create" or "Access List" from the
"Access List" drop-down list to create new Access List or modify an Access List.
3.
Access List (1-99/1300-1999): Click in the "Access List (1-99/1300-1999)" textbox and specify an
IP Access List number 1 ~ 99 or 1300 ~ 1999 for Access List.
4.
Action: Click "Action" drop-down menu from "Action" drop-down list to choose "permit" or
"deny" to permit or deny certain traffic if conditions matched.
IP address: Click in the "IP address" textbox and specify the IP address of originating network or
5.
host sending packet.
Mask: Click in the "Mask" textbox and specify the Wildcard bits in dotted decimal notation to
6.
apply to the source. Ones go in bit positions to ignore.
Example: IP address: 192.168.1.10. Mask: 0.0.0.3. Then IP address 192.168.1.8 ~ 192.168.1.11
would be permitted or denied.
7.
Add: Click "Add" button to add IP Access List number.
8.
Submit: Click "Submit" button when you finished ACL Configuration settings.
PAGE 77
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704

Advertisement

Table of Contents
loading

Table of Contents