Table of Contents
Advertisement
DHCP Server
1.
DHCP Binding Table: Click on "DHCP Binding Table" to show DHCP Binding Table. Click
"Refresh" button to refresh DHCP Binding Table. Click on "DHCP General Setting" to back to
DHCP General Setting.
2.
DHCP Server Status: Click "DHCP Server Status" drop-down menu from "DHCP Server Status"
drop-down list to choose "Disable", "Default VLAN 1", or other VLAN.
3.
Start IP: Click in the "Start IP" textbox and specify the default Start IP for the DHCP Server.
4.
End IP: Click in the "End IP" textbox and specify the default End IP for the DHCP Server.
5.
Subnet Mask: Click in the "Subnet Mask" textbox and specify the default subnet mask for the
DHCP Server.
6.
Gateway: Click in the "Gateway" textbox and specify the default gateway for the DHCP Server.
7.
Primary DNS: Click in the "Primary DNS" textbox and specify the default primary DNS for the
DHCP Server.
8.
Secondary DNS: Click in the "Secondary DNS" textbox and specify the default secondary DNS
for the DHCP Server.
9.
Lease Time: Click in the "Lease Time" textbox and specify the default lease time for the DHCP
Server.
10. Update Setting: Click "Update Setting" button when you finished DHCP Server General Setting.
PAGE 104
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
Advertisement
Table of Contents
