Table of Contents
Advertisement
SNMP GENERAL SETTING
1.
SNMP Status: Click "SNMP Status" drop-down menu from "SNMP Status" drop-down list to
choose "Enable" or "Disable" to enable or disable SNMP.
2.
Description: Click in the "Description" textbox and specify a new description for SNMP.
3.
Location: Click in the "Location" textbox and specify a new location for SNMP.
4.
Contact: Click in the "Contact" textbox and specify a new contact for SNMP.
5.
Trap Community Name: For each "Trap Community Name", Click in the "Trap Community
Name" textbox and specify a trap community name.
6.
Trap Host IP Address: For each "Trap Host IP Address", Click in the "Trap Host IP Address"
textbox and specify a trap host IP address.
7.
Link Down Trap: Click "Link Down Trap" drop-down menu from "Link Down Trap" drop-down
list to choose "Enable" or "Disable" to enable or disable link down trap.
8.
Link Up Trap: Click "Link Up Trap" drop-down menu from "Link Up Trap" drop-down list to
choose "Enable" or "Disable" to enable or disable link up trap.
9.
MAC Notification Trap: Click "MAC Notification Trap" drop-down menu from "MAC
Notification Trap" drop-down list to choose "Disable" or "Enable" to disable or enable the Switch
to send MAC Notification Trap to the network management system (NMS).
10. MAC Notification Interval (1 to 65535 seconds): Click the text box and type a decimal number to
configure the MAC notification interval in seconds. The range is 1 to 65535 seconds. The switch
sends the MAC Notification Trap when this amount of time has elapsed.
11. MAC Notification History Size (1 to 500): Click the text box and type a decimal number to
configure the maximum number of entries in the MAC notification history table. The range is 1 to
500.
12. MAC Notification Added: Click and choose the port to enable MAC Notification Trap on an
interface port.
13. MAC Notification Removed: Click and choose the port to disable MAC Notification Trap on an
interface port.
14. Update Setting: Click "Update Setting" button when you finished SNMP General Setting.
PAGE 82
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
Advertisement
Table of Contents
