Optical Systems Design OSD2700SFP SERIES Operator's Manual page 180

7.10 ACL
ACL Information, ACL Configuration
ACL is supported by EX27/77/87/29/89000 product series.
ACL CONFIGURATION
Policy Map:
Create New Policy Map:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use policy-map command to create a policy map and no policy-map command to delete a policy map.
3. Command Syntax:
(no) policy-map NAME
NAME Policy map name.
4. Example:
Create a policy map p1.
switch_a(config)#policy-map p1
switch_a(config-pmap)#
Attach Policy Map to Interface:
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2. Usage:
Use service-policy input command to attach a policy map to an interface and no service-policy input
command to remove a policy map from an interface.
3. Command Syntax:
(no) service-policy input NAME
NAME Policy map name.
4. Example:
Attach a policy map p1 to interface fe1.
switch_a(config)#interface fe1
switch_a(config-if)#service-policy input p1
switch_a(config-if)#
PAGE 180
OSD2700SFP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10112704