Exchanging The Gripper Arm - Agilent Technologies 1220 Infinity II LC User Manual

11
Maintenance and Repair
Autosampler

Exchanging the Gripper Arm

When Defective gripper arm
Tools required Description
Straightened paper clip.
Parts required #
1
Preparations • Select Start in the Tools function in the LMD software Change Gripper.
• Turn off the power to the instrument.
• Remove the upper front cover.
1
Identify the slit below the gripper motor and the gripper
arm release button.
288
p/n Description
G1313-60010 Gripper assembly
2
Rotate the arm approximately 2.5 cm (1 inch) to the left
and insert the straightened paper clip into the slit.
1220 Infinity II LC System User Manual