Agilent Technologies 1220 Infinity II LC User Manual page 78

4
LAN Configuration
Automatic Configuration with BootP
3 Press Edit BootP Addresses... to edit the Tab File.
4 In the Edit BootP Addresses... screen press Add... to create a new entry or
5 Leave Edit BootP Addresses... by pressing Close.
6 Exit BootP Settings by pressing OK.
Restarting the Agilent BootP Service
1 In the Windows control panel, select Administrative Tools > Services. The
2 Right-click Agilent BootP Service and select Start.
3 Close the Services and Administrative Tools screens.
78
Figure 19 Edit BootP Adresses screen
select an existing line from the table and press Modify... or Delete to change
the IP address, comment, subnet mask, for example, in the Tab File.
If you change the IP address, it will be necessary to power cycle the
instrument for the changes to take effect.
Services screen appears, see
Figure 18 on page 77.
1220 Infinity II LC System User Manual