Connecting The Agilent 1220 Infinity Ii Lc To The Pc - Agilent Technologies 1220 Infinity II LC User Manual

Connecting the Agilent 1220 Infinity II LC to the PC

The instrument is delivered from factory with the default network
configuration settings. (Configuration dip switches 7 & 8 set to ON). This
enables you to quickly connect it via the crossover patch cable (part of the
accessory kit) with your PC.
Factory default IP address:
192.168.254.11
LAN port
Configuration dip switches
Instrument with DAD
Figure 8
On the G4294B use the configuration dip switches of the DAD extension board to
N O T E
configure your LAN connection.
1220 Infinity II LC System User Manual

Connecting the Agilent 1220 Infinity II LC to the PC

Instrument with VWD
Location of the Configuration Dip Switches and LAN Port
3
Installation
45