Agilent Technologies 1220 Infinity II LC User Manual page 72

4
LAN Configuration
Automatic Configuration with BootP
4 Open Windows Explorer.
5 Go to the BootP directory on the Agilent ChemStation DVD and double-click
6 If necessary, click the Agilent BootP Service... icon in the task bar.
7 The Welcome screen of the Agilent BootP Service Setup Wizard appears. Click
8 The End-User License Agreement screen appears. Read the terms, indicate
9 The Destination Folder selection screen appears. Install BootP to the default
10 Click Install to begin installation.
11 Files load; when finished, the BootP Settings screen appears.
12 In the Default Settings part of the screen, if known, you can enter the subnet
72
BootPPackage.msi.
Next.
acceptance, then click Next.
folder or click Browse to choose another location. Click Next.
The default location for installation is:
C:\Program Files\Agilent\BootPService\
Figure 15 BootP Settings screen
mask and gateway.
Defaults can be used:
• The default subnet mask is 255.255.255.0
1220 Infinity II LC System User Manual