Agilent Technologies 1220 Infinity II LC User Manual page 308

11
Maintenance and Repair
Diode Array Detector (DAD)
3
Disconnect the flow cell inlet capillary (top) from the
union.
5
Loosen the thumb screw and remove the flow cell outlet
capillary (bottom) with the union.
7
Insert the flow cell while pressing the flow cell holder.
308
2.
1.
4
Disconnect the waste tubing (bottom) from the union.
6
Remove the flow cell while pressing the flow cell holder.
8
Insert the flow cell capillaries into the union holder (top
is inlet, bottom is outlet).
1220 Infinity II LC System User Manual
1.
2.