Changing The Ip Address Of An Instrument Using The Agilent Bootp Service - Agilent Technologies 1220 Infinity II LC User Manual

Changing the IP Address of an Instrument Using the Agilent BootP
Service
Agilent BootP Service starts automatically when your PC reboots. To change
Agilent BootP Service settings, you must stop the service, make the changes,
and then restart the service.
Stopping the Agilent BootP Service
1 From the Windows control panel, select Administrative Tools > Services. The
2 Right-click Agilent BootP Service.
3 Select Stop.
4 Close the Services and Administrative Tools screen.
Editing the IP address and other parameters in EditBootPSettings
1 Select Start > All Programs > Agilent BootP Service and select Edit BootP Settings.
2 When the BootP Settings screen is first opened, it shows the default settings
1220 Infinity II LC System User Manual
Services screen appears.
Figure 18 Windows Services screen
The BootP Settings screen appears.
from installation.
LAN Configuration
Automatic Configuration with BootP
4
77