Agilent Technologies 1220 Infinity II LC User Manual page 311

1
Use a 4 mm hex key to unscrew the window assembly
[1] and remove the gasket [2] from the cell body.
N O T E
Carefully take one of the gaskets (#6 back or # 7
front) and insert it into the cell body.
Do not mix the gasket #6 and # 7.
Gasket # 7 has the smaller hole and must be on the
light entrance side.
Verify that the gasket is positioned flat on the bottom
and the light path is not blocked.
If you removed all individual parts from the window
assembly refer to the figures in
Cell" on page 352 for the correct orientation of the
parts.
1220 Infinity II LC System User Manual
"Standard Flow
Diode Array Detector (DAD)
2
Insert the window assembly [1] into the cell body.
Maintenance and Repair
11
311