Exchanging The Rotor Seal - Agilent Technologies 1220 Infinity II LC User Manual

11
Maintenance and Repair
Autosampler

Exchanging the Rotor Seal

When Poor injection-volume reproducibility
Leaking injection valve
Tools required Description
Wrench 1/4 inch
Hex key, 9/16 inch (supplied in the tool kit)
Parts required #
1
Preparations • Remove upper front cover.
• Remove the leak tubing (if necessary).
Removing the stator head
C AU T I O N
The stator face is held in place by the stator head. When you remove the stator head,
the stator face can fall out of the valve.
➔
280
p/n
0101-1416
Carefully handle the valve to prevent damage to the stator face
Description
Rotor seal (PEEK)
1220 Infinity II LC System User Manual