Gripper Arm - Agilent Technologies G1329A User Manual

7
Maintenance
Simple Repairs

Gripper Arm

When Defective gripper arm
Tools required • Straightened paper clip.
Parts required #
1
Preparations • Select "Start" in the maintenance function "ChangeGripper".
• Turn off the power to the autosampler.
• Remove the front cover.
1
Identify the slit below the gripper motor and the gripper
arm release button.
102
Part number Description
G1313-60010 Gripper assembly
2
Rotate the arm approximately 2.5cm (1 inch) to the left
and insert the straightened paper clip into the slit.